User Tools 1 - Bench Planes 

 

Bench Planes No 1 - 8 Block Planes Rebate Planes, Compass Planes Special Purpose Planes, Plough Planes Wooden Planes Home
Screwdrivers, Drills, Braces & Bits Saws & Saw Sets

Spokeshaves, Routers, Beaders, Scrapers

 Chisels, Hammers, Axes Other User Tools Orders
Bench planes sizes 1 - 8 by Stanley and other makers   - English infill planes   - custom made planes -  new planes   -     see also Wooden planes, Stanley and Metal Planes pages   Quick Pick Page

 
  Stanley 3C smooth plane. Two pats 02 in bed. Excellent condition apart from one small scratch on the mouth. If it's a hairline crack it certainly doesn't go all the way through. Hard to tell. A$ 140
  Late model Stanley USA No 3 smooth plane with hardwood handle and knob. Most of the original finish intact, few paint splatters. A$ 90
  Stanley 3 SW smooth plane. All original, saw dust and all. Approximately 90% japanning intact. A$ 150
  Late model Stanley 3C with rosewood handle and knob. Keyhole lever cap, 90% japanning intact. A$ 125
  Stanley 3 SW vintage smooth plane. 90% finish intact. Pat 1910 in bed, part decal on handle. VG A$ 160
  Late model Stanley 3 smooth plane with hardwood handle. Over 90% finish intact. A$ 90
  Sargent 408 (# 3 size) smooth plane. Approximately 80% finish intact but needs cleaning. A$ 70
  Worth USA No 3 size smooth plane. Mild surface rust, otherwise good. A$ 30
  Acorn No 3 size smooth plane. Original cutter, bed re-painted. A$ 55
  Stanley Defiance 1243 (No 3 size) smooth plane. Marked Made in USA on cutter and in bed. $ 35
  Shelton No 3 size smooth plane. Not a rare tool as such but this size hardly ever shows up. A$ 90
     
     
     
  Bedrock 604C with SW logo on cutter. Good user plane, just a few minor tool chest dings to side. Approximately 60% japanning intact. A$ 250
  Early Stanley 4 smoothing plane with V logo cutter. S casting in bed, lateral adjuster with 3 patents to 88. 90% japanning intact, rosewood looks cleaned and has been sprayed with lacquer. Doesn't look too good to me, I'll remove the lacquer when I clean my next batch of tools. A$ 120
 

Stanley 4 smooth plane, late model made in USA. Close to 100% original finish intact. A$ 90
  Stanley 4 smooth plane. 3 patents to 1910 in bed, blank lever cap and rare 1920 SW X logo on cutter. All parts correct for this vintage. Hairline crack in rosewood handle. Very rare model A$ 150
  Acorn made by Stanley No 4 smooth plane. Perfect in box. Box is not much to look at and has lost most of it's label. A$ 60
  Shelton No 4 smooth plane. This one has the name and the patent numbers cast in the bed. (most of them have no name, only the patent number) A$ 50
  Cast aluminium 9 1/2" smooth plane marked "4 Edge Blade" mad in USA, Pat pend. Several makers including Stanley, produced similar looking tools. According to David Heckel's Sargent book this one was made by Sargent for Sears, Roebuck & Co. A$ 35
     
     
  Stanley No 4 1/2 smooth plane. Bed is made in USA, rest English. A$ 40 sold
  Stanley 4 1/2, Pat 1910 in bed, Pat 92 on cutter. Rosewood knob and handle have tight cracks. A$ 80
     
 
     
  Rapier England No 500 jack plane with corrugated sole. Perfect in original box (lacks label) A$ 100
  Stanley 5C SW CAN model, all parts correct for this vintage, ca 1933-1935 with kidney shaped hole in lever cap. A$ 90
  Stanley Two Tone No 5 jack plane in fine condition. Manufactured for the National Hardware convention. This is the 1940-1 model with Stanley Two Tone Made in USA on the blade. Fine A$ 140
  Stanley USA No 5 jack plane with well over 90% japanning intact. Very good rosewood, nice patina. A$ 110
     
  Stanley 5 1/4 junior jack plane. Pat 1910 in bed, Pat Apl 92 on cutter. Tight crack in handle. Frog fits perfectly but must be from a later model. Some scratch marks (identifying marks) to both sides. Few paint splatters, 80% japanning intact. Overall a good or better user plane. A$ 130sold
  Stanley 5 1/2 C jack plane with scarce WW(1906) trademark on cutter and two 02 patents in bed. Approximately 75% japanning intact. Few minor dings to handle spur, few minor paint splatters in bed. A$ 180
     
 
  Stanley 6C with excellent Preston cutter. Pats 02 & 10 in bed. Most of the japanning intact. Hardwood handle is a replacement. Owner's initials stencilled into one side. Nice, clean corrugated user. A$ 100
  Carter Australia No 6 jack plane. Bed re-painted, small flaw in casting, top edge. Nice, clean plane. A$ 80
  Stanley 6 low knob with two patents 02 in bed. Most japanning intact. A$ 100 sold
 
  Stanley 386 jointer gauge. Complete and in good order with about half the nickel plating intact. This handy attachment for jointer planes (fits any size from 5-8) was sold with only one rosewood knob and a vacant position that enables the user to switch the handle/knob for l/hand or r/h work. A$ 150
  Orange frog model Stanley SW jointer plane with 90% finish intact. A$ 175
  Rapier 700 jointer plane with Stanley Australia cutter. Very good overall condition. Owner's initials on side. A$ 110
  Stanley UK No 7 jointer plane. Most of the original finish intact. Casting on this plane is about 1/4 thicker than the American version. Very light surface rust. sold
  Pope No 7 jointer plane. Original cutter, good wood, most of the blue finish intact. sold
 

 

Pre-lateral Stanley 7 jointer plane. Handle spur has some bruising to side. Not much japanning left. A$ 175
  Record 07 jointer plane in very little used condition. A$ 180
 

Stanley 7C low knob jointer plane with corrugated sole. Very nice rosewood with just a few paint splatters on the handle. Bed has been repainted. Few minor pitting spots to sides and sole should disappear with use. Two Pats 02 & 10 in bed, full length J logo cutter. A$ 220
     
     
  Bedrock 608C jointer plane with one-line lever cap, V logo cutter and good rosewood handle and knob. Most of the original finish intact. The cutter has about 1 1/2" use left. I'll include a new generic cutter for use. A$ 440sold
  Union No 8 jointer plane in excellent condition. Only apology is a slightly shortened handle spur. This plane comes with a parallel iron that is about 1/4 thicker than a comparable Stanley cutter. A$ 220sold
  Late model Stanley 8C jointer plane. 90% original finish intact. Very good. A$ 330
     
 
Home User Tools Stanley Stanley Parts Metal Planes Wooden Planes Edge Tools Measuring Tools Misc. Tools
Plumb Bobs Books Other Antiques Auctions Orders Gallery Links Last Column email Hans