Special purpose
planes plus all sizes of combination planes
 |
|
more
Collectable
quality
Stanley Tools
click here |
|
|
 |
|
Stanley 40 1/2 scrub plane. Approximately half japanning
intact. SW logo on cutter. A$ 150 |
 |
|
Stanley 40 scrub plane with SW logo on cutter. Good handle,
front knob has small crack. A$ 125 |
 |
|
Stanley 72 chamfer plane with bullnose attachment. Nice, original wood, J
logo on cutter. Not much japanning left. This is a very good and complete
user tool. A$ 450 |
 |
|
Marples M43 small plough plane with 4 assorted cutters (one is marked
Marples) complete with depth stop. The clamp screw is a matching
replacement. A$ 75 |
 |
|
English "Patsy" 55A rebate/chamfer plane. The fence has two sides, straight
and bevelled. Made from die cast aluminium. 6" long with 1" cutter. I think
the cutter is the same as the one in the Patsy 75 bullnose plane. This model
is pretty rare. A$ 130 |
 |
|
Rapier small plough plane in wooden box, I think it's the original. All
three cutters marked Rapier. A$ 80 |
 |
|
Record No 044 small plough plane long rods and set of 8 cutters. Few
minor rust spots. 90 |
 |
|
Stanley 55 plough plane. Guaranteed complete with all parts plus a copy of
the instructions. Comes with the early set of 52 cutters in 4 cutter boxes.
One label is faded, others good. The plane has surface rust only, I believe
the plating is good. The only fault I can see are two small chips on
the T-bracket of the auxi tower. sold |
 |
|
Stanley 45 SW Can in original fitted wooden box. Fine, little used plane.
Complete with full set of cutters. Screwdriver and instructions are
replacements. Partial label on top of box. A$ 300 |
|
 |
|
Stanley 50S small plough plane. The S model was manufactured in the UK
only, it replaced the American made Stanley 54 with the traditional set of 8
plough cutters. Most plating intact. Box a bit rough, plane in very good
condition. Comes with copy of instructions. A$ 150 |
 |
|
Record 050 plough plane, complete with 16 cutters,
chip breaker, cutter clamping bracket for small cutters (often called cam) and instructions in good custom made box. A$
120 |
 |
|
Carter C54 plough plane. Original box is ok but has only a fraction of the
label left. Comes with 7 out of 8 cutters. Not much of the blue finish left.
A$ 60 |
 |
|
Record 050A with 17 cutters and 1939 instructions in original
box. Same as the 050 with the addition of two narrow cutters and the
clamping bracket to hold them. ( the A model was dropped later and all 050
came in this configuration) A$ 160 |
 |
|
Record 050 complete with 17 cutters and all attachments plus instructions in
original box. Excellent plane with well over 95% nickel plating intact. Just
some light surface rust on long rods. Box has two taped edges but is solid
with full labels inside and out. A$ 160sold |
 |
|
Carter Australia C54 small plough plane IOB with full set of 8 cutters. I
believe this is the very last model. sold |
 |
|
Stanley 13-052 recent plough plane with 10 cutters. sold |
|
|
|
|
