Record 722 router. Unlike the Stanley 271, this little router has a single draw-bolt locking mechanism for both cutter positions (open and closed mouth) A$ 85
User Tools 1- 8 - Spokeshaves, Routers, Beaders & Scrapers
|
|
Record 722 router. Unlike the Stanley 271, this little router has a single draw-bolt locking mechanism for both cutter positions (open and closed mouth) A$ 85 |
|
|
|
Stanley 71 UK router, complete in original box. A$ 150 | |
|
|
Record 071 router. This is probably one of the neatest restoring jobs I've come across. Looks like new. Comes with a V-cutter and two 1/2" cutters. A$ 130 | |
|
|
Sargent 73 double sided mini router. Some light surface rust. Very good. A$ 125 | |
|
|
Stanley 55 hollow faced spokeshave. SW logo on cutter. Some mild rust. A$ 90 | |
|
|
Rare Stanley 63X spokeshave. Marked No x63 inside. V logo cutter. A$ 60 | |
|
|
Stanley 53 spokeshave with adjustable mouth. Re-painted black. J logo on cutter. A$ 20 | |
|
|
Ohio Tool Co double sided spokeshave. Re-painted. A$ 25 | |
|
|
Stanley 60 double sided spokeshave. Both cutter with 1870s J logo. A$ 55 | |
|
|
Stanley USA No 63 spokeshave with round sole. A$ 30 | |
|
|
Woodstock Australia spokeshave with 2 1/8" Gregsteel cutter. A$ 10sold | |
|
|
Stanley 64 UK spokeshave with straight sole. New cutter. A$ 15 | |
|
|
Stanley 64 UK spokeshave with straight sole. Little used too. A$ 15 | |
|
|
Stanley USA No 151 spokeshave with SW logo on cutter. Not much japanning left. A$ 25 | |
|
|
Stanley 63 spokeshave with round sole. No japanning left. A$ 20 | |
|
|
Record 151 adjustable spokeshave with straight sole. A$ 20 | |
|
|
Stanley 53 spokeshave with straight sole and adjustable mouth. A$ 35 | |
|
|
Falcon Australia No 151 spokeshave. A$ 25sold | |
|
|
Stanley 51 & 151 spokeshaves. Both with red caps. A$ 35 | |
|
|
Record 051 and Record A51 spokeshaves. Both in good condition. sold | |
|
|
Record A 51 spokeshave with good cutter. A$ 15 | |
|
|
Stanley 64 spokeshave with straight sole. Made in Can A$ 15 | |
|
|
Two early looking iron spokeshaves with Union cutters. A$ 35 | |
|
|
Preston rabbeting or filletster router. Maker's mark on cutter. Most japanning gone, one fence screw is a replacement. A$ 80 | |
|
|
Very good Preston 5/8 ovolo router. Both cutters marked. A$ 70 | |
|
|
Preston 3/4 ovolo router. No markings except oveloe on back. A$ 45 | |
|
|
Preston lambstongue router. Both cutters marked. A$ 50 | |
|
|
|
Stanley 68 rabbet shave with V logo on cutter. Widely used by wagon (and early car) makers. Some light rust and a couple of minor pitting spots to sole and blade. A$ 90 |
|
|
Stanley 68 rabbet shave with V logo on cutter. Widely used by wagon (and early car) makers. Cap and cutter most probably are replacements and there is an extra hole in the sole from an old fence. Not at all common. A$ 45 | |
|
|
Well made 12 1/2" maple scraper with 1 1/2" blade and scrolled ends. A$ 35 | |
|
|
X-large 14 beech spokeshave with 4" cutter by C. Johnson, Sheffield. A$ 30 | |
|
|
Lot of two 10 1/2" beech spokeshaves, one with brass sole. Both in good, useable condition. A$ 25 | |
|
|
Coachmaker's 16" mahogany router. Excellent condition. A$ 35 | |
|
|
Old Woman's Tooth router, 6 1/2 x 3" with 3/4" cutter. A$ 35 | |
|
|
No doubt factory made nickel plated gull wing scraper. No maker's marks. 10" long with a 1 3/4" Stanley cutter. A$ 90 | |
|
|
Good Stanley 12 scraper with rosewood handle and replaced cutter. Most of the japanning intact. A$ 170 | |
|
|
Stanley 81 nickel plated scraper with rosewood sole. Very good replacement blade made from old saw steel. Most plating intact, wood bottom has a few small chips missing. A$ 90 | |
|
|
E.C. Atkins, Indianapolis handled scraper with 3" blade. The handle swivels upwards to clamp the blade in place. A$ 50 | |
|
|
13" maple scraper with large wing nut. I guess it's factory made. A$ 60 | |
|
|
Stanley 82 scraper. Cutter is a replacement. A$ 110 | |
|
|
Starrett adjustable scraper. Handle can be twisted to lock head into position. A$ 50 | |
|
|
Stanley 80 UK scraper in box with copy of instructions. Probably unused. A$ 55 | |
|
|
Sargent 54 scraper with new, thick Kunz blade. Very good condition with most of the original finish intact. A$ 50 | |
|
|
Stanley 81 nickel plated scraper with rosewood sole. Very good replacement blade made from old saw steel. Most plating intact, wood bottom has a few small chips missing. A$ 90 | |
|
|
Stanley 70 box scraper with V logo (1910) on cutter. Good wood, most japanning intact. A$ 75 | |